|
Land Data Acquisition System
|
|
|
|
|
|
|
Sercel 428XL is latest seismic acquisition
system for Land. It present the most flexible and reliable seismic system available
in the industry today. Seismic data can be remotely accessed from any location in
the world for better and quicker evaluation and control of the quality of data.
The entire system include:
• Uniquely designed Ground Equipment.
• Telemetry Options which can address
any layout equirement.
• Network Capability and Transmission
telemetry redundancy.
• The software for operations and
QC is dedicated to enhance crew
efficiency and lower operating costs.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Marine Data Acquisition System
& Streamers
|
|
|
|
|
|
|
A new system brings
to the world of marine seismic acquisition two major break-through advanced flexible
architecture for an optimal productivity & small diameter fluid. This advanced
flexible architecture fulfills the requirements like on-board, the Central Unit
of this System can be interfaced with any of the external systems used in the instrument
room and the auxiliary channels acquisition unit can be easily placed in the most
convenient location. The solid cable design offers increased noise attenuation over
fluid filled sections during periods of marginal weather conditions, thereby extending
the data collection windows.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seismometers/Geophones
|
|
|
|
|
|
|
|
|
Seismometers are the instruments
used for measuring the natural ground motion of the earth due to the frictional
force. The exploration seismologist detects ground vibrations with this device,
which is also called geophone. These detectors are electromechanical transducers
that convert a mechanical input into an electrical output.
The main features of high performance geophones are Ultra-low Distortion, High Reliability,
Higher Sensitivity & No Shunt Resistor. The low distortion geophones have been
developed by unitizing a scientific breakthrough in Rare Earth Magnet Technology.
This technology coupled with other unique features, results in the most advanced
geophone in the Seismic Industry.
Today's high technology recording systems are capable of precision measurement of
distortion, sensitivity, damping, natural frequency, phase characteristics and other
operational specifications of the entire geophone spread.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seismic Acquisition System |
|
|
|
|
|
|
|
|
The 428XL builds
on the 400
Series’ proven technology, reliability and efficiency with all new hardware and
software designed to enable the largest channel count operations in the industry.With
a capacity of 100,000 channels – backed by a new telemetry structure that boosts
by 500 percent the number of channels a wire transverse cable can address in real-time
at 2ms – the 428XL gives you outstanding accuracy, speed and ease of used for even
the largest survey.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Streamer Control System |
|
|
|
|
|
|
|
NAUTILUS is a
totally integated system for acoustic positioning
of seismic streamers and sources for control of seismic
streamers. It includes three sub-systems:
• Streamer depth
and steering controller
• Acoustic transceivers
•
Advanced redundant telemetry sub-system
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydrophones |
|
|
|
|
|
|
|
Hydrophones are
instruments used in Marine Data Acquisition. The main features of hydrophones are high output,
natural frequency 10Hz, and easy polarity check The different types of Hydrophones
have different design, diameter, length, operating temperature and depth range
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cables |
|
|
|
|
|
|
|
|
There are different
types of cables for example, Line Cables, Transverses, Extensions
and Bay-Cables which are
used in seismic
acquisition field units.
These cables
are equipped with
the appropriate connectors and adapters perfectly designed
and tested to withstand the most stringent field conditions.The high-grade cables
allow for a very large coverage of applications under different conditions, ranging
from very cold to very hot temperatures and from dry to wet or sea environment.
Resistances, portability, reliability, are the features of modern cables.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnetic Susceptibility Meter
|
|
|
|
|
|
|
A sensitive
and accurate tool for field measurement of outcropping rocks, drill cores and rock
samples.
• Features:
1. HIGH SENSITIVITY 1x10-6 SU UNITS : The sensitivity is 10 times better than
the competitive instruments.
2. SMALL SIZE and LOW WEIGHT : It is truly shirt pocket-sized instrument. With dimension
100x65x25 mm and
weight 0.128 kg.
3. LOW NOISE : Thanks to sophisticated signal processing the noise induced in pick-up
coil is supressed well
under resolution 1x10-6 SI units.
4. DEEP PENETRATION OF THE SIGNAL : The sensor design enables to get 90% of its
signal from tge first 20mm
of the rock. This feature allows more accurate readings on uneven
surfaces of all rock types.
5. SIMPLE OPERATION : Autoranging and two button control makes the meter the easiest
to operate by one
hand only. Internal memory can store 29 readings.
• Also available with following features:
1. HIGH SENSITIVITY 1x10-7 SU UNITS : The sensitivity is 100 times better than the
competitive instruments.
2. SMALL SIZE and LOW WEIGHT : It is truly shirt pocket-sized instrument. With dimension
100x65x25 mm and
weight 0.150 kg.
3. LOW NOISE : Thanks to sophisticated signal processing the noise induced in pick-up
coil is supressed well
under resolution 1x10-7 SI units.
4. DEEP PENETRATION OF THE SIGNAL : The sensor design enables to get 90% of its
signal from tge first 20mm
of the rock. This feature allows more accurate readings on uneven
surfaces of all rock types.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Portable Magnetic Susceptibility Meter
|
|
|
|
|
|
|
Portable Magnetic Susceptibility Meter is designed for laboratory or field use to
measure bulk susceptibility of standard 25.4 mm cores. Small sample fragments can
be measured in the pot with inner volume 25 cm3
. The design reflects the latest in electronics advances and offers unrivalled features
:
• single integrated housing incorporating the measurement zone, the electronics
and
power supply connected to PC.
• simple operation without any control knobs.
Operation of the PMSM is straightforward. Typically a small sample in a plastic
vessel is placed into the measuring coil for analysis which is carried out under
instuctions from a personal computer. The PMSM is connected to a PC with a cable
to serial RS232 port. Results are available in several seconds and are conventionally
stored and displayed on the PC. Flexibility and user friendliness have been the
key criteria in the design of the PMSM software.
Caliberation samples are supplied. Checjing the calibration takes only a few minutes.
Features :
• High Sensitivity 1 x
10-6 SUI Units
•
Measurement not sensitive to specimen shape
•
Battery operated
•
Single Integrated Housing Connected to PC
Note : PMSM - Portable Magnetic Susceptibility Meter
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Portable Scintillation Counter |
|
|
|
|
|
|
|
|
Portable Scintillation Counter represents a functionally
superior concept for a hand held gamma radiation detection device. Its rugged practical
design, simple operation and high sensitivity make it well suited for uranium exploration
applications as well as environmental monitoring and health physics dosimetry. It
has also been designed to meet or exceed the ANSI N42 standards for hand held inspection
and interdiction instruments for Homeland Security and Nuclear Safeguards
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Neutron/Gamma Ray Survey Instrument
with Directional Response |
|
|
|
|
|
|
Portable Scintillation Counter represents a functionally
superior concept for a hand held gamma radiation detection device. Its rugged practical
design, simple operation and high sensitivity make it well suited for uranium exploration
applications as well as environmental monitoring and health physics dosimetry. It
has also been designed to meet or exceed the ANSI N42 standards for hand held inspection
and interdiction instruments for Homeland Security and Nuclear Safeguards
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vibrators |
|
|
|
|
|
|
|
|
The most common method of reflection
surveying on land utilizing a non-explosive source is the vibroseis method. This
uses tractor-mounted vibrators to pass into the ground an extended vibration of
low amplitude and continuously varying frequency, known as sweep signal.A typical
sweep signal lasts for seven or more seconds and varies in frequency between limits
of about 10 and 80 Hz. The field recordings consist of overlapping reflected wave
trains of very low amplitude corrected for seismic noise, but cross correlation
of the recording with the known sweep signal enhances the seismic signals and yield
a seismic recording of similar appearance to that which would be obtained with an
explosive source.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VSP System - Geowave |
|
|
|
|
|
|
|
|
It is a Digital multi-level (up
to 32) Downhole Seismic Array to record vertical seismic profiles (VSP). It can
also be used for semi-permanent installation in a fixed position in the well for
passive monitoring (hydraulic fracturing mapping or reservoir monitoring) or to
record heavy surveys such as 3D VSP and 4D VSP around the well for detailed and
time-lapse reservoir imaging. Benefits of using Geowaves:
• All Downhole tools can be connected to the same WAVELAB
Acquisition Unit for real-time recording.
•
Light weight equipment
•
Easy connection / disconnection
•
Resistant to extreme well environments
•
Easy maintenance
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VSP System - Sinwave |
|
|
|
|
|
|
|
|
This is a small diameter digital
multi-level downhole seismic array for up to 12 levels. It benefits from the same
technological advances as GeoWaves™ with the additional benefit of being usable
in very small diameter wells or through any completion restriction thanks to its
reduced diameter (1 in. 11/16, standard for production logging tools).
Benefits of using Slimwave:
•
Can be deployed in small diameter wells
•
All downhole tools can be connected to the same WAVELAB
Acquisition Unit for real-time recording
•
Light weight equipment
•
Easy connection / disconnection
•
Resistant to extreme well environments
•
Easy maintenance
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VSP System - Maxiwave |
|
|
|
|
|
|
|
|
It is a 100-level Digital Downhole
Seismic Array to record vertical seismic profiles (VSP). It can also be used for
semi-permanent installation in a fixed position in the well for passive monitoring
(hydraulic fracturing mapping or reservoir monitoring) or to record heavy surveys
such as 3D VSP and 4D VSP around the well for detailed and time-lapse reservoir
imaging. It rests spooled on a reel, for fast & easy deployment at reasonable
cost.
Benefits of using Maxiwave:
• All Downhole tools can be connected to the same WAVELAB
Acquisition Unit for real-time recording
• Resistant to extreme well environments
• Reduction in time & cost
• Easy connection / disconnection
• Light weight equipment
• Easy maintenance
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metrolog Gauges - Multilog4 |
|
|
|
|
|
|
|
|
• Enhanced Reliability
- Metal-to-metal seal for a better protection of the electronic board
- Easy-to-use gauge operated by anyone in less than 10 minutes
- Battery laterally connected avoids disconnection in operation
• Metrolog Breakthrough
- The only triple sensor memory tool
- Electronics protected and insulated from vibrations
- External communication port reduces maintenance cost & time
- Smart battery system displays the remaining power of your cells
• Applications
- For well diagnosis
- Easy-to-make production/injection profile in monophasic wells
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metrolog Gauges - Deptholog |
|
|
|
|
|
|
|
|
• Metrolog Breakthrough
- Depth adjusted anytime according to known references in the well
- In sitecalibration with integrated correction of cable elasticity
and slippage
- Complete data analysis and data merge with other downhole tools
• Applications
- Real time display and recording of depth, running speed & tension
(optional)
- Automatic creation of production log versus depth
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metrolog Gauges - CGM4-HT |
|
|
|
|
|
|
|
|
• Enhanced Reliability
- Metal-to-metal seal for a better protection of the electronic board
- Easy-to-use gauge operated by anyone in less than 10 minutes
- Battery laterally connected avoids disconnection in operation
• Metrolog Breakthrough
- External communication port reduces maintenance time & cost
- Electronics protected and insulated from vibrations
- Smart battery system displays the remaining power of your cells
• Applications
- For very accurate reservoir monitoring, static/dynamic gradient
and build-up
- High sensitivity, high stability, high resolution
- For hostile conditions & extreme temperatures
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metrolog Gauges - CGM4 |
|
|
|
|
|
|
|
|
• Enhanced Reliability
- Metal-to-metal seal for a better protection in gas
- Low maintenance gauge operated by anyone in less than 10 mins
- Battery laterally connected avoids disconnection in operation
• Metrolog Breakthrough
- External communication port reduces maintenance time & cost
- Unique in-nose mounted Quartz crystal sensor for a better
sensitivity
- Electronics protected and insulated from vibrations
- Smart battery system displays the remaining power of your cells
• Applications
- For highly accurate reservoir monitoring, gradient and build-up
- High sensitivity, high stability, high resolution
- For interference/Pulse Tests and very long term obs
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Portable Borehole Loggers |
|
|
|
|
|
|
|
|
Portable borehole logging systems are available in two basic configurations, either
as a 300 meter (1000’) depth capacity system or 600 meter ((2000’) depth capacity
system. Both are complete Portable Borehole Logging Systems, and are supplied with
permanent shipping and storage cases. As delivered, they are complete and ready
to log including DELogger log acquisition software.
Either system features an
integral data acquisition and uphole power unit. A PC laptop or notebook computer
serves as the operator interface and to acquire, display in real time, store and
playback borehole data as a function of the supplied DELogger software.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tricone |
|
|
|
|
|
|
|
|
• Roller Cone bits drill by first
crushing the rock, following through
with a gouging action to remove the fractured pieces.
• They require high “weight on bit” to fail the rock.
• Tungsten Carbide and steel used for cutting structures.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Natural Diamond |
|
|
|
|
|
|
|
|
• Natural Diamond Bits drill by ploughing andgrinding
the rock.
•
High rpm is required for performance due to the limited depth of
cut per revolution.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polycrystaline Diamond Compact (PDC) |
|
|
|
|
|
|
|
|
• PDC cutters cut in a shear mode.
• This shearing action is the most efficient cutting action compared
to rollercone and natural cutting actions.
• PDC cutters exhibit a self-sharpening wear pattern.
• The Tungsten Carbide substrate wears faster than the diamond
table forming a sharp diamond lip.
• As the cutters on roller cone and natural diamond bits wear their
drilling efficiency reduces.
• The self sharpening mechanism of PDC cutters thus improves
drilling efficiency.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC VF Drilling RIG |
|
|
|
|
|
|
|
|
Features :
• Single shaft AC VF gear drives drawbacks: The main brake of
drawbacks is hydraulic disc brakes, the auxiliary brake is dynamic
brake, meanwhile it is equipped with auto-bit feeling devices.
• The automatic system which controls the position of travelling
block prevents it colliding with other parts.
• The rig adopts integrated design of mechanical, electrical, digital
control and communication, adopting up-to-date vector control,
VF, digital control and field bus communication technology.
• Main parts conform to API spec.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC Drilling RIG |
|
|
|
|
|
|
|
|
Features :
• It adopts AC-SCR-DC drive mode, DC motors drive draw works,
rotary table and mud pump. It can realize stepless speed regulati-
ng to satisfy preferably the drilling technology requirements
• Hydraulic disk brake or bank brake is used as the main brake of the
the drawworks, the auxiliary brake is electromagnetic eddy currrent
brake or Eaton pneumatic disk brake. It is equipped with automatic
device to prevent the travelling block from coliding with other
parts, the position indicator of travelling block and the auto-bit-
feeding device.
• Rotary table is driven independently : Equipped with high power
triplex single action mud pump and driven by narrow V band.
• Key mechanical parts conform to API spec.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electromechanical Drilling RIG |
|
|
|
|
|
|
|
|
Features :
• The rig is powered by “4 parallel 2000 (3000) series diesel engines
+ hydraulic torque converter (coupling) + chain box drive”.
• The drum of drawworks is grooved. The main brake is hydraulic
disk brake and auxiliary brake is electromagnetic eddy current
brake. It is equipped with auxiliary lifting device, shift is
changed
by air tube clutch.
• Substructure is box-on-box, or type of “swing up in front, skid and
trailer at back” Drawworks is placed at lower position.
• Rotary table is independently driven by ACVF motors or 0-240
r/min stepless regulation. Integrated chain box compound,
Equipped with high power triplex single action mud pump which
is
driven by cardan shaft.
• Key mechanical parts conform to API spec.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chain Drive Drilling RIG |
|
|
|
|
|
|
|
|
Features :
• The rig is powered by 3 or 4 “2000 (or 3000) series diesel engine,
coupling forward reducer box".
• The drum of drawworks is grooved. The main brake is hydraulic
disk brake and auxiliary brake is electromagnetic eddy current
brake. And it is equipped with auxiliary lifting device. The
shift is
changed through air tube clutch, Cathead drawworks is equipped
with sand drum.
• Drawworks of rigs with nominal depth above 400m is split type
and
installed above and under the drill floor. Drawwork is equipped
behind the back of the drill floor, according to the bevel gear
box
and cardan shaft, the power is transmitted upto the drill floor
to
drive the cathead drawworks and rotary table.
• Integrated chain box compound, Equipped with high power triplex
single action mud pump which is driven by cardan shaft.
• Key mechanical parts conform to API spec.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Belt Drive Drilling RIG |
|
|
|
|
|
|
|
|
Features
:
• The rig is powered by three 2000 series diesel engine coupling
forward reducer box"
• The drum of drawworks is grroved. The main brake is hydraulic
disk brake and auxiliary. And it is equipped with auxiliary
lifting
lifting device. The shift is changed through air tube clutch.
• Drawworks
is placed at lower position. “Bebel gear box + cardan
shaft” are installed on the drill floor is box-on-box type,
compact,
easy to rig-up. K-type mast without pulling rope fit for assembly
at ground level and rigging up as a whole.
• Driven by belt
compound device. Equipped with high power triplex
single action mud pump which is driven by cardan shaft.
• The rig is designed and manufactured is compliance with
SY/T5609-1999 standard. And it can operates under the temper-
ature ranging from +50oC to -35o
C, confirm to HSE regulations.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crown Block |
|
|
|
|
|
|
|
|
Features :
• Built to API 4F & 8A
• Conform to industrial standard SY/T5527
• The sheave groove is quenching-treated, anti-abrasion and long
of service life.
• Equipped with wireline ward device, preventing the wireline from
bounce or fall off
• Equipped with bumping wood and protective net.
• Equipped with gin pole for block servicing
• Equipped with sand block and auxiliary block
• The sheaves of crown block and mated travelling block are fully
interchangeable
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Travelling Block |
|
|
|
|
|
|
|
|
Features :
• Built to API 8A.
• Sheave groove subject to intermediate frequency for better case
hardness and longer wireline service life.
• Sheave are all equipped with bipyramidal roll bearings with unique
oil way to each bearing.
• High strength wireline elevator
• The sheave and bearing are interchangeable to those of mated
crown block
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hook |
|
|
|
|
|
|
|
|
Features :
• Built to API Spec 8A.
• Equipped with hydraulic bumper for drill pipe joint protection during
breakout.
• Reliable safeguard locking device is equipped on the mouth of the
hook.
• Major load-bearing parts subject to nondestructive inspection.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Swivel |
|
|
|
|
|
|
|
|
Features :
• Built to API Spec 8A.
• Standard bail and double pin (male) alloy sub are equipped.
• Wash pipe and packing are box structure, convenient to replacing
on drill floor, no need to dissassemble rotary hose and gooseneck
• The through in the top of gooseneck provides passage way for
well logging wireline.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotary Table |
|
|
|
|
|
|
|
|
Features :
• Built to API 7K.
• Gear and pinion are made of alloy steel.
• Split type main bushing is steel costing. Kelly drive and slip drive
are optional.
• Pin drive may be available in roller type brushing of API standard
Kelly or hexagonal Kelly, either long or short slips is usable.
• Matched with API standard casing bushing and special lift fitting
sufficient lubricants and reliable scaling.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC Drawworks |
|
|
|
|
|
|
|
|
Features
:
•
All bearings are roller bearing, Shaft are made of
alloy steel.
•
The drum is grooved. Ventilating air clutches constitute
the high
and low speed ends.
•
The brake is hydraulic disk brake. The disc brake
is water-cooled
or wind-cooled.
•
The auxiliary brake is eddy current brake, water-cooled
or wind-
cooled.
•
Being shifted through
air clutch.
•
Being transmitted through chains.
• Chains are lubricated forcedly by thin oil, bearings are
lubricated
by grease.
• Split construction
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanical Drawworks |
|
|
|
|
|
|
|
|
Features
:
•
All bearings are roller bearing, Shaft are made of alloy steel.
• Chains with forced lubricants can transmit with high accuracy
and
high strength.
• The drum is
grooved. Ventilating air clutches are applied to the
high and low speed ends.
• The brake
drum (brake disc) is dealt with forced cooling with
circulating water.
• The surface
case was hardened with medium frequency and is
durable.
• The tooth
profile of sprocket was hardened with medium
frequency, involute serration tooth clutch worked a shifting
clutch
• Main brake
is band brake or disc brake, the auxiliary brake is eddy
current brake (water-cooled or air-cooled).
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC VF Drawworks |
|
|
|
|
|
|
|
|
Features
:
• All bearings are roller bearings. Shafts are made of alloy steel.
• The drum is grooved.
• Auto-hit-feeding device.
• Main brake is hydraulic disc brake. The disc is water-cooled or
air-cooled.
• Auxiliary brake is dynamic brake.
• Single shaft constructed.
• Being transmitted
through two-stage gear reducer the shift is
transmitted by hand.
• Gears are lubricated forcibly by thin oil.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series P Mud Pump |
|
|
|
|
|
|
|
|
Features
:
• Having long stroke, being able to operate under low speed to
lengthen the use of vulnerable parts at the fluid end.
• Forced lubricants combined with splash lubrication to make
lubrication effect.
• Advance structure, durable, can ensure itself to operate smoothly
and meet the special requirements of customers to drill medium
deep wells.
• Compact, safe, suction valve and discharge valve are interchang-
eable, main components of hydraulic cylinder and fluid end on
each pump are interchangeable.
• Durable fluid end greatly improves the performance of triplex mud
pump, furthermore its dependent structure makes examination
and maintenance convenient.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series F Mud Pump |
|
|
|
|
|
|
|
|
Features
:
• Having long stroke, being able to operate under low speed to
lengthen the use of vulnerable parts at the fluid end.
• Forced lubricants combined with splash lubrication to make
lubrication effect.
• Advance structure, durable, can ensure itself to operate smoothly
and meet the special requirements of customers to drill medium
deep wells.
• Compact, safe, suction valve and discharge valve are interchang-
eable, main components of hydraulic cylinder and fluid end on each
pump are interchangeable.
• Durable fluid end greatly improves the performance of triplex mud
pump, furthermore its dependent structure makes examination and
maintenance convenient.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 3NB Mud Pump |
|
|
|
|
|
|
|
|
Features
:
• Dynamic end – the frame is a welded structure with steel plate,
subject to post welding internal stress relief. The type of
transmission gear is involve, smooth running, efficient and
durable
Crankshaft is one-piece hollow cast. It is splash lubricated.
• Fluid end : suction flange and discharge flange
conform to ASA and API specification.
• Piston rod and extension rod are connected by
clamp to make assembly and disassembly easy and
quick
• Beach at the bottom of valve positioning hole
prevents valve sinking. Piston and cylinder liner are
cooled and lubricated by independent spraying
pump device for longer service life.
• Vulnerable parts are interchangeable.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mast |
|
|
|
|
|
|
|
|
Features
:
• Mast (derrick) is generally classified as A-type, K-type ( open
front type), tower-type and mast type etc.
• A type mast : its leg section is rectangular or triangle shape with
better loading capacity and stability, connected with pins
between sections installed at low level and errected or lowered
down integrally by drawworks and A-frame.
• K-type mast, namely open front mast, its transverse section is a
П shape truss structure, it’s both sides are composed of several
pieces or segments, its back is rigid frame or pole system of
truss
connected with pias or bolts between segments and members,
may be installed at low level and errected or lowered down
integrally by drawworks or hydraulic cyliner, has the advantages
of convenient installation and disassembly, excellent rigidity.
• Conforming to API Spec-4F.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Substructure |
|
|
|
|
|
|
|
|
Features :
• Substructure is classified as box on box type, pieces mounting
type, singshot type, swing up type and telescoping type.
• The substructure of box type and pieces mounting type, have a
relative higher substructure at front platform, stisfies the
installation of standard BOP, otherwise the substructure at
back
platform is relatively lower, adapts to the installation of
heavy
equipments such as drawworks and transmission unit etc.
• The substructure of slingshot type adapts to electric rig, the drill
floor and equipments on it can be installed at low level and
then
the drill floor and mast can be raised together. There are hydraulic
bumping cylinders on the left and right of the drill floor,
in mast
rising, they act as bumper, in mast laying down, they act as
push
power.
• The swing up structure, the drill floor and equipments on it can be
installed at low level and the mast can be raised at low location
of drill floor, then the whole drill floor.
• The telescoping structure, mast and substructure are lifted with
hydraulic cylinder, the structure stress is reasonable, light
-
wighted and convenient to raise and movie.
• Conform to API Spec 4F.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nitrogen - PSA |
|
|
|
|
|
|
|
|
Purity from 95-99.9995%, flow lab
to 35,000 SCFH. Each unit has two adsorber beds filled with a carbon molecular sieve
(CMS). Compressed air enters one end of a bed. While the smaller oxygen molecules
are adsorbed by the CMS, the larger nitrogen molecules pass through the sieve and
are stored. Once the tube is saturated with oxygen, the first adsorber releases
the gas, and the second adsorber starts the process over again.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nitrogen Membrane Trailer System |
|
|
|
|
|
|
|
|
These systems are designed with
all the necessary equipment to produce N2 effectively in the field and typically
can be mounted on a single trailer.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nitrogen Membrane Portable System |
|
|
|
|
|
|
|
|
Portable N2 systems are available
in flows up to 90,000 scfh and purity as high as 99.5%.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nitrogen Cylinder Filling |
|
|
|
|
|
|
|
|
Nitrogen cylinder filling stations
can be easily incorporated with any nitrogen generator. This gives you the ability
to fill your own cylinders for a fraction of the cost of purchase/delivery.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Underground PSA Nitrogen System |
|
|
|
|
|
|
|
|
This system can be placed within
the mine in close proximity to the affected seal area, which provides mine operators
the capability to inert any sealed area for as long as needed while eliminating
potential obstacles such as terrain, access, or cost.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oxygen - 95% |
|
|
|
|
|
|
|
|
A rugged design ideally suited for
commercial and industrial use. Used for decades by our customers - glass blowers,
fish farms, brazing, flame cutting, etc.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oxygen - 99% |
|
|
|
|
|
|
|
|
This generator is a multi-stage
system that starts with a 95% oxygen generator. The 95% oxygen is then processed
through a second stage to produce 99% oxygen and then through an oxygen booster
in the final stage. The gas is then stored in an tank at the desired pressure.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Portable Oxygen Generation |
|
|
|
|
|
|
|
|
They allow you to produce oxygen
to be used as a direct feed to an application, or to fill cylinders up to 2200 PSIG.
Each system can be operated independently or in multiple combinations to provide
unlimited Oxygen flow 24/7.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seismograph |
|
|
|
|
|
|
|
|
Seismograph are available in 24
and 48 channels. The high-tech integrated seismograph is designed and manufactured
for exploration in land, marine and down-hole environments. The user friendly system
gives a competitive edge to perform the best result with system capabilities.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
61 Channel Resistivity Imaging System |
|
|
|
|
|
|
|
|
The FlashRES64 is 60 times faster
than data than current systems, and yields higher quality data in shorter periods
of time. Extremely flexible, the system is automatic and captures 64,000 wave forms,
using 64 electrodes within just one hour. In the field there is no need to specify
what configurations need to be used. All an operator needs to do is lay out the
cables, connect electrodes, setup the FlashRES64 and record.
Collection of large volumes of data, now allows higher quality decision making.
You can also delineate geological structures between tunnels, with a crosshole method.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seismic Data Processing Software |
|
|
|
|
|
|
|
|
New challenges are continually
confronting seismic processors. The benefits to be gained from increasing integration
of workflows and the improving ability to extract more quantitative information
from seismic have been advanced by the development of the Vista family within Geocluster,
CGG's processing software suite
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seismic Data Management Software |
|
|
|
|
|
|
|
|
This software incorporates query,
picking, loading and administration interface for most Exploration and Petroleum
related data items including wells, seismic, cartography, cores, well tests, drilling
parameters, exploration document and projects. The entire range of data items are
organized in the POSC epicenter data model, which includes geopositioning, processed
seismic data, field seismic data, wells etc. This software is made up of a number
of modules, which includes map based positional query interface, seismic interface,
well interface, document interface, project interface and management with different
utilities.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Real-Time Quality Control Software |
|
|
|
|
|
|
eSQC-PRO is an optional software
package for real-time QC of seismic data which is fully integrated to the 408UL.
In order to maintain the Zero-Dead-Time architecture of the 408UL CMXL, all QC functions
are performed in parallel with the seismic data acquisition processes,without slowing
down crew operations. Furthermore, eSQC-PRO gives the ability for any authorized
person to remotely access in real-time to the seismic data from a standard PC platform
connected to the internet.
• Short Display.
• Attributes Calculations and Display Export.
• Shot-by-Shot Historical Views.
• Replay and File Export.
• Secured remote access.
|
|
|
|
|
|
|
|
|
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Archival & Retrieving System |
|
|
|
|
|
|
|
|
The reflector image is built by
constructive interference. Data can also be migrated from a floating datum plane.
In such a case, the difference in elevation between the source and receiver is taken
into account when migrating the data. For better turn - around, this software can
run on several processors at the same time. Because of its parallel implementation,
the module makes use of user-defined work directories.
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VSP Processing State - Vecom |
|
|
|
|
|
|
• 2D/3D VSP modeling
• 2D/3D VSP survey design
• Geometry and model builders
• Raytracing and FD wavefield
• Isotropic and anusotropic media
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VSP Processing State - Visus |
|
|
|
|
|
|
• 3D VSP visualization
• Display models, logs, survey, geometry and interpretation
• Create 3D movies
• 3D stereo display
|
|
[ Back to
Top ] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|